Nokia Lumia 800 SIM Card Problem

How to Solve Nokia Lumia 800 SIM Card Problem?

The only problem you will encounter under the banner of Nokia Lumia 800 SIM card problem is the insert SIM message. If you are not getting network signals in your Lumia 800 then it is the network problem.

Here is the manual and hardware solution of Nokia Lumia 800 SIM Card problem:

 

Manual Solution

• Restart your phone and check.
• If the above step doesn’t work then remove, clean and reinsert your SIM Card and check.
• Check with any other good and working SIM card.

Hardware Solution

• The very first thing that you need to do is to Clean SIM Contacts with a tool having sharp edges (If you are not willing to remove metal covering of SIM Socket) and check.
• Check continuity of SIM sensor after inserting SIM card. If it is damaged then replace it.

• Check continuity between all 6 SIM Socket contacts and components one by one. If any of the components is damaged or faulty, replace it.
• Reheat SIM Controller IC and check. If it is still not working then replace it.

Nokia Lumia 800 Speaker Problem

How to Solve Nokia Lumia 800 Speaker Problem?

Problems

• No sound in speaker.
• Low Sound in Speaker.
• Distorted sound in speaker.

 

 

Reasons of Problems

• Dust can be the one of the biggest reasons for no, low and distorted sound.
• It can also happen due to water damage or excessive encounter of moisture which in turn damage the speaker of phone.
• No continuity between speaker’s contacts / terminals and coils.
• Could be the problem with any of the capacitors and coils that comes under the banner of speaker’s circuits.

Workaround

• Like in every sound related problem, you need to check your volume settings and current active profile.
• Restart your phone and check.
• If the above methods fail then update your OS.

• Clean the Speaker hole with the help of a tiny brush.

Tools Required

• Multi meter.
• Star screw driver.
• Plastic tool.
• Small cleaning brush.

Hardware Procedure

For Low and Distorted Sound

• Change your speaker’s mesh and check.
• If the above step fails then change your Lumia 800 Speaker, as there is no other solution of this problem than that.

For No Sound

• Remove speaker and clean its contacts / terminals and check.

• Now remove shield over the components of Speakers (Shield at the back side of the board)

 

• Check continuity between speaker’s positive terminal and Coil – 1
• Now check speaker’s positive terminal connection with Capacitor – 1.
• Check Negative terminal’s connection with Coil 2 and afterwards with Capacitor – 2.
• If none of the above mentioned steps work then you need to change the speaker, as there is no other solution than that.
• Gently Heat Audio IC and check, if faulty replace.

Normally you encounter Nokia Lumia 800 speaker problem when your phone encounters any kind of physical damage. Moisture and water are known to be the killer of speakers, for example if you take calls while in shower or soon after shower, there is a high probability that a drop or excessive moisture can enter in the speaker hence damaging it or its parts. It’s hardware solution isn’t that difficult, and all you need to do is to have steady hands and all the right tools that are needed in order to perform this procedure.

Samsung Galaxy Note 3 Bluetooth and Wi-Fi Problems

How to Solve Samsung Galaxy Note 3 Bluetooth and Wi-Fi Problems?

 

You surely cannot go a day without using Wi-Fi on your Note 3, and this is mainly because Wi-Fi is known to be one of the services that you normally find in your home, offices, airports, public libraries etc. hence allowing you to use internet whenever you want.

We need Wi-Fi service not only for socializing, but also for performing work related activities on the go. Besides Wi-Fi, Bluetooth also has significant importance, as it allows you to share your desired data with other for free and without the need of any type of internet connectivity. Therefore having problems in your Bluetooth and Wi-Fi of your Note 3 is surely a big issue that you need to resolve it at the earliest.

In the following lines you will get to know about Galaxy Note 3 Bluetooth and Wi-Fi problems and their solutions in the best possible manner.

Problems

Note 3 Bluetooth Problems

• Bluetooth of Note 3 is not turning ON.
• Your phone cannot be found by other devices.
• Bluetooth not connecting.
• Data between two devices are not able to transfer.
• Transfer halts in-between.
• Bluetooth option is disabled.

Note 3 Wi-Fi Problems

• Router not found by Samsung Galaxy Note 3.
• No network.
• Signals are weak.
• Packets are not transferring at all.
• Wi-Fi keeps on disconnecting.
• Wi-Fi option disabled.

Workaround

Quick Fix for Bluetooth

• The very first thing that you should do is to toggle between ON – OFF options of your Bluetooth and check.
• Check your device’s visibility status.
• Remove and reinsert battery and check.
• Refresh your device’s research.
• Factory reset your phone (This should be considered as the last resort).

Quick Fix for Wi-Fi

• Toggle between ON – OFF options of Wi-Fi and check.
• Restart your Wi-Fi router, as most of the times it is able to resolve the issue.
• Restart your device and check.
• Remove battery and re-insert and check.
• Check for any kind of Firewall on your router.
• Go with a Factory reset.

Hardware Solution

Most of the people really don’t need to go with hardware solution, as most of the times the above mentioned quick fixes are able to resolve the Bluetooth and Wi-Fi issues. Just in case if you are not able to resolve your Bluetooth and Wi-Fi problem via above mentioned methods, then all you have to do is to follow the following steps:

• The very first thing that you need to do is to slightly pull up the antenna contact, if that doesn’t work then re-solder that antenna contact.
• Now check Coil 1 and Coil 2, if any of them is faulty, replace it.
• Afterwards check Capacitor mentioned below, if it is faulty then replace.
• If the above step fails then gently heat Bluetooth and Wi-Fi IC and check. If it still fails then replace it.

Samsung Galaxy S4 Home Button Problems

How to Solve Samsung Galaxy S4 Home Button Problems?

Problems

• Home button not working.
• Delay in response when button is pressed.
• Home button becomes stiff and is not pressed easily.
• Home button needs to be pressed very hard in order to get it working.

Reasons of Problems

• Dust might be present at the corners of home button due to which it becomes stiff or you need to press it very hard in order to get it working.
• Might be due to phone lagging problem.
• Home button strip might have lose contact with on-board connector.
• Might be due to any kind of physical or water damage.
• Home button components might be damaged from inside.

Workaround

Most of the times, simple workaround methods are enough to overcome S4 Home button problems.

For Delay in Response

 

Turn your phone off and press Home Button multiple times, and then turn your phone ON again and check.

For Stiffness and Hard Press Problem

Press Home button and keep on pressing it, while pressing clean dust and any kind of moisture from its surrounding properly and check.

Tools Required

• Star Screw Driver.
• Plastic Separation Tool.
• Cloth for cleaning purpose.

Hardware Solution

• When it comes to hardware, the very first thing that you need to do is to unplug home button strip and check its onboard connector for any loose contacts.

• Clean both home button strip and its onboard connector, after you do that re-plug and check.
• In case display strip still has a loose contact with on-board connector than change the entire charging dock strip, (Home button is at the charging dock strip).
• If the above step fails then you need to change your entire display, and this is mainly because of the fact that Home Button components are inside the display screen, which cannot be repaired manually, as that’s the machine’s work. You don’t have any other option than to change your display screen in order to get your Home button fixed.

Fixing your Samsung Galaxy S4 Home button can also be either least or most expensive work, as sometimes in worst cases you need to change your entire display screen, which is surely going to cost you a fortune. However if you are planning to go with changing your display screen in order to fix your Home Button, then it is highly recommended that you should sell your S4 broken Screen to BrokenLCDs.com, as they offer best price for every broken LCD Screen. However they accept broken LCD screens of smart phones in bulk. 

Nokia Lumia 920 Buzzer/Ringer Problem

Steps to Solve Nokia Lumia 920 Buzzer Problem

Following are the set of Nokia Lumia 920 Buzzer problems and solution:

Problems

• No ringing sound.
• Low ringing sound.
• Distortion in ringing sound.

Manual Solution

• Check your phone’s volume settings along with your current active profile.

Hardware Solution

 

 

In the following lines you will get to know hardware solution for Lumia 920 No ringing and Low / Distorted sound.
For No Ringing Sound

• Clean and slightly pull up buzzer contacts and check.
• Check terminals of buzzer via multi meter, if there is no sound then it means that the coil is open. In this case you have to replace your buzzer.

• Trace the tracks of buzzer contacts towards their respective coils, if coils are faulty place jumper. In case coils are working then:
  • Remove Buzzer IC and check connection between IC on-board contacts and coil. If there is continuity between on-board contacts then it means Buzzer IC is faulty, replace it.
  • If there is continuity between Buzzer IC contacts then place jumper between the contacts and fix IC back.

For Low and Distorted Sound

• Clean buzzer hole and check.
• Change buzzer.

Nokia Lumia 920 Charging Problems

Let’s have a look at most noted Nokia Lumia 920 Charging problems as well as their solution:

Problems

• Phone not Charging.
• Showing “Charger Not Connected” error message.
• Phone heats up during charging.

Manual Solution

• Check with any other original Nokia Lumia charger.
• Clean Charging connectors and check

Hardware Solution for Lumia 920 Charging issue

• Clean Charging Connector and check.

• Change Charging strip and check.

• Check resistor as well as capacitor, if they are faulty replace them.
• Gently heat charging IC and Check. If it is still not working then replace it.

Samsung Galaxy Note 3 Random Restart and Boot Loop Problem

One of the most noted problems reported in Samsung Galaxy Note 3 is the random restart and boot loop problem. This type of problem is not found in every Note 3 phone, but a good number of users have reported this problem. Apparently it is not a hardware issue, as reported by Samsung, and Samsung has classified that as a software issue. Let’s have a brief look at these Samsung Galaxy Note 3 problems:

Problems

• Samsung Galaxy Note 3 restarts as soon as it is turned on.
• Restarts at any point.
• Note 3 goes in a boot loop.
•  

 

 

Reasons of Problems

• Too many services or applications are trying to start at the same time might be causing this issue.
• Any of the downloaded app might be corrupt which is causing this boot loop.
• Too many applications are trying to get updated at the same time, hence causing Note 3 to restart.
• Micro SD card might be corrupt or faulty, as most of the times SD card is the cause of such type of problem.

Software Solution

In the following lines you will get to know about 3 different Software / Workaround methods that will help you to resolve Galaxy Note 3 random restart and reboot problem, and this is because as per the user reviews either of the three methods have worked for the users like a charm.

Solution 1

You can ask for the replacement phone from your Samsung Service Center, however a good number of people have reported that they are having similar problems with their replacement phones, while others have told that the replacement ones are working perfectly. Besides that, you can also wait for a patch or a fix to be launched by Samsung.

Solution 2

• The very first thing that you need to do is to remove the battery and SD card from your phone, afterwards insert only your phone’s battery back and check.
• If that doesn’t work then go into:
  • Menu.
  • Settings.
  • Wi-Fi.
  • Menu.
  • Advanced Settings and uncheck the option saying “Always allow scanning”.
• After following the above mentioned step turn your device off and reinsert the SD card.
• Boot your device and check for the problem. A whole lot of people have notified that their problem is resolved after following Solution no. 2.

In case your problem isn’t resolved then all you have to do is to move towards:

Solution 3

• Remove SD card and backup your entire phone’s data, now reinsert the SD card in your phone reformat it by going into:
  • Settings.
  • Storage.
  • Format SD Card.
• In case you are already stuck in a boot loop and you are not able to enter into your phone’s menu then go with the factory reset option of your phone via hardware button offered, however you will be losing your entire data in this process. Try to back up first.
• Afterwards follow the following steps:
  • Turn your device off.
  • Press and Hold Volume Up, Home and Power Button, as seen as you see the Note 3’s logo only release the power button and when you see Android System Recovery screen also release the remaining buttons.
  • Now highlight “Delete all user data option” and press power button to select it and wai until the process is done.
  • Now finally select reboot system now option and press power button, and as soon as you will do it your device will reboot.

The solution number 3 is also found to be most effective when it comes to overcoming these issues.

Samsung Galaxy S4 SIM and Memory Card Problem

SIM Problem:

• SIM Card not inserted error message.

MMC Problems:

• Memory Card not found.
• Not able to store data in MMC.
• MMC not accessible.
• Not able to read MMC.
•  

SIM:

• Restart your phone and check.
• Change SIM card and check.

MMC:

• Remove and reinsert memory card.
• Scan your MMC via Antivirus and check.
• Back up your Memory Card and Format, afterwards recheck.
• Check with any other working memory card.

Hardware Solution for SIM and MMC Card

• Re-solder all 6 SIM card contacts.
• Check continuity between SIM Power line (Mentioned in picture) and capacitor, if capacitor is damaged replace it. (P.S. If you are not able to replace capacitor, then replace the entire SIM Card and Memory Card Strip.)

• Re-solder on-board connector of SIM and MMC Card and check.

Secret Codes Of HTC Desire Series All Models, Hidden Code

Secret Codes helps you to access some internal functions of mobile which are intended for developers and troubleshooting purposes. They are the combination of numeric and Special Characters like * and #.
These codes can give you access to the whole new world of hidden menu, diagnostics test and much more.

 

 

 

 

 

 

So, here i am going to show you how to access the internal function of HTC Desire Touch screen android phones for testing the various hardware parts of your phone if it is working properly or not with the help of this secret code you can test LCD, vibration, camera, sensor (accelerometer, sensor, proximity sensor, magnetic sensor), touch screen, speaker, earphone, sub key, etc... if you have any hardware problem with your phone you can identify with this code if it is working or not to do this follow the steps below.

Step 1 : First of all open your keypad (where you dial the phone numbers)

Step 2 : Then dial the secret code *#*#3424#*#*
              This will open up a HTC Function Test Program as shown in figure ( you need to click accept to  proceed)

Then select the test you need to perform and press the Run key.




One more code that you can try on you HTC mobile phone is *#*#4636#*#*
By dialing this code on the mobile you can get information on phone, battery, wifi and some usage statistics like shown in the image below

There are plenty more of these to be found on the internet, these are just some of the best ones.

Sumsung C3303 Charging jumper

Sumsung C3303 Charging jumper/usb jumper

Galaxy Core GT-i8262 HIDEN CODE

Here i am going to show you how to access the internal function of galaxy Core GT-i8262 for testing the various hardware parts of your phone if it is working properly or not with the help of this secret code you can test lcd, vibration, camera, sensor (accelerometer sensor, proximity sensor, magnetic sensor), touch screen, speaker, sub key, etc... if you have any hardware problem with your galaxy Core you can identify with this code if it is working or not to do this follow the steps below.
First of all open your keypad

Then dial the secret code *#0*#. Now you get a screen with title LCD TEST and below that you have lots of option to test various hardware parts of your phone such as speaker, sensor, lcd, etc
To go back use right physical button
while testing the touch you have to touch and mark all the squares back button does not work
Other use full secret codes for android phone tested on galaxy Core

• * #1234# to check software version of phone.
• *#12580*369# to check software and hardware information.
• *#0228# Battery status (ADC, RSSI reading)
• *#32489# Service mode
• *#7780# factory data reset galaxy Core
• *2767*3855# Full factory reset (Don't dial it does not ask you to confirm unless you have problem)

These codes will work on all the models of galaxy series.

How to Connect HTC One to a Wi-Fi Network

Wi-Fi indeed gives you numerous reasons to connect to it and walk around freely while checking or sending emails from your HTC One smartphone, downloading a movie while watering plants or sitting in the garden, video-calling your friends while digging out spoon in your favorite chocolate pudding, posting tweets or Facebook updates, shuffling through your podcasts, newspapers or magazines, or streaming Netflix or Hulu TV shows from your Roku sitting 3 rooms deep inside your house on to it, or playing online games etc. It’s fun and at the same time convenient going Wi-Fi on your brand new HTC One smartphone device to stay connected to your world while keeping a tab on what’s going in the world or the space. Here you go with the steps to turn on Wi-Fi in your HTC One smartphone and connect to your Wi-Fi network.

Step 1
Tap “Settings” from the notification arena to launch the “Settings” screen.

Step 2
From the “Settings” screen, tap the “Wi-Fi” button to set it “On”. As you can see that it’s “Off” here, once I toggle the button, it gets set to “On”. Now that the Wi-Fi service is turned on, it will begin scanning for the available Wi-Fi networks within your reach. Move on to the next step now.

Step 3
Now you can see the available Wi-Fi networks for connection. Tap your Wi-Fi network and then tap the “Connect” button. If your Wi-Fi network is password-protected, your will be prompted for one. Enter the wireless security key and then, tap the “Connect” button. It’ll take a moment for your Wi-Fi network to validate the key and connect to it. Now that you are connected to your Wi-Fi network, get set go with wireless browsing, online gaming, YouTube videoing, streaming movies, and Hulu TV shows, emailing, and a lot more.

Nokia 225 Dual SIM View

Nokia 225 Dual SIM View

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Specifications

• Dimensions

  • Height: 124 mm
  • Width: 55.5 mm
  • Thickness: 10.4 mm 
  • Weight: 100.6 g
    

• Display

  • Display size: 2.8 ''

• Photography

  • Main camera sensor: 2 MP 
  • Main camera focus type: Fixed focus 

• Power management

  • Maximum standby time with dual SIM: 27 days
  • Maximum talk time (2G): 21 h
  • Maximum music playback time: 49 h

 

 

 

 

 

 

Browsing at its best.

Put the epic 2.8" screen to good use with Nokia Xpress Browser. It's more efficient and affordable than other browsers, and with Bing now built in as standard find the stuff you love will be easier than ever.

 

 

 

 

 

 

 

 

 

 

Get online. Get social.

When awesome happens, capture it with a sharp 2 megapixel camera. Then share it straight away – Facebook, Twitter and Nokia Xpress Browser all come pre-loaded. Use Slam via Bluetooth to share files with friends, or load up a 32GB micro SD into the hot-swap memory card slot and save them for later.